|
Can Do | |
| Home Inspections Inc. | ||
| 3032 S. Paseo Loma Circle | ||
| Mesa, AZ 85202-7951 | ||
| Voice or Fax 480-831-6237 | ||
| Arizona Home Inspections By |
| Arizona State Certified Home Inspector #39760 |
| Arizona Board of Technical Registration Firm #11968 |
| Can I store items in my attic? | ||||
| Home Buyers Sellers Sample Report Pictures FAQs Email Us Attic-Roof Index |
Before you store
anything in your attic, you need to ensure that the attic framing is designed
and capable of supporting the loads you intend to place there. There are basically two methods of construction in the attics of single family dwellings--conventional or stick-framing, and engineered or truss-framing. Conventionally framed roofs consist of rafters or boards that make up the slope of the roof; ceiling joists that make up both the floor of the attic space and the ceiling framing for the floor below; and the ridge board, which provides both an anchoring point and additional support to the tops of the rafters. Conventional roof framing is usually made up of large stock dimensional lumber such as 2x8, 2x10, or 2x12 boards. Trusses are engineered products that are designed and built to combine the rafter, ceiling joist and ridge all into one component, and are usually built of 2x4 lumber secured together using perforated metal plates at all joints. Unless they are specifically designed for carrying the additional load, trusses will not adequately support your stored items. You will experience cracking and damage to the finished ceiling in the floor below, as well as possible structural damage to the trusses themselves. Conventionally framed roofs may be more forgiving, however, a licensed contractor or structural engineer should be consulted before making any modifications to your attic framing. |
|||
Who can do home inspections?
Can Do Home Inspections, AZ Home Inspectors performing AZ Home Inspections.
Copyright 2007 Can Do Home Inspections Inc.